Locating The I/O Expansion Slots - Compaq ProLiant DL760 Maintenance And Service Manual

Locating the I/O Expansion Slots

The I/O expansion slots are located on the I/O board in the I/O module. The I/O board in the
Compaq ProLiant DL760 server has 11 slots divided into 3 buses. The Primary bus
through 9) is keyed for 64-bit 5-V PCI boards or 64-bit PCI universal boards. The Secondary
bus (slots 1 through 6) and the Tertiary bus

V PCI/PCI-X boards or 64-bit universal PCI/PCI-X boards. The PCI/PCI-X expansion slots
associated with each of the three buses and the supported speeds are identified in Figure 2-35,
Figure 2-36, and Table 2-7. Bus balancing is not required...
Figure 2-35. Diagram of I/O slot connections from the rear of the server
Figure 2-36. Bus distribution of PCI Hot Plug slots
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system
components to cool before touching them.
2
1 2 3 4 5 6 7
11 10 9
Removal and Replacement Procedures 2-41
(slots 10 through 11) are keyed for 64-bit 3.3-

1 3
8 9 10 11
8 7 6 5 4 3
(slots 7


2 1