2-50 Compaq ProLiant DL760 Servers Maintenance and Service Guide
I/O Module Central Support Bracket
To remove the I/O module central support bracket:
1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter.
2. Remove the I/O module. See the sections on removing the I/O modules earlier in this
chapter.
3. Remove the fan cage assembly. See "Fan Cage Assembly" earlier in this chapter.
4. Loosen the thumbscrew securing the bracket to the chassis
5. Remove the bracket
Figure 2-45. Removing the I/O module central support bracket
Reverse steps 1 through 5 to replace the I/O module central support bracket.
.
2
.
1