2-54 Compaq ProLiant DL760 Servers Maintenance and Service Guide
Removing the 2-Slot Plenum
To remove the 2-slot plenum:
1. Locate the 2-slot plenum attached to the side of the fan cage plenum.
2. Remove the fan cage plenum. See "Removing the Fan Cage Plenum" earlier in this
chapter.
3. Slightly separate the fan cage plenum walls that trap the 2-slot plenum.
4. Remove the 2-slot plenum.
Figure 2-49. Removing the 2-slot plenum
Reverse steps 1 through 4 to replace the 2-slot plenum.