2-36 Compaq ProLiant DL760 Servers Maintenance and Service Guide
Cache Accelerators
IMPORTANT: Cache Accelerators must be installed when processors are installed on both buses.
To remove a Cache Accelerator:
1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter.
2. Remove the Processor and Memory Module. See "Opening and Removing the Processor
and Memory Module" earlier in this chapter.
3. Loosen the thumbscrew of the middle air baffle and lift the baffle upward to allow access
to the Cache Accelerator. See "Middle Air Baffle" earlier in this chapter.
4. Locate the Cache Accelerator.
5. Push down on the release lever on the side of the Cache Accelerator slot
6. Remove the Cache Accelerator
1
Figure 2-30. Removing a Cache Accelerator
Reverse steps 1 through 6 to replace the Cache Accelerator.
NOTE: Cache Accelerator modules are keyed to ensure correct alignment.
.
2
.