Removing A Pci/Pci-X Expansion Board - Compaq ProLiant DL760 Maintenance And Service Manual

Removing a PCI/PCI-X Expansion Board

To remove a PCI/PCI-X expansion board:
1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter.
2. Open the top access panel. See "Top Access Panel" earlier in this chapter.
3. Use the PCI Hot Plug button to turn off power to the slot
during the power down transition and turns off when the power down is complete. For
more information on PCI Hot Plug LED indicators, see Chapter 4, "Connectors, Switches,
and LED Indicators."
NOTE: Pressing the PCI Hot Plug button within five seconds of the first press cancels the action.
Figure 2-38. Accessing the PCI Hot Plug button
CAUTION: Do not open the slot release lever unless the green PCI Hot Plug LED indicator is off.
System power down and subsequent data loss could occur.
1
Removal and Replacement Procedures 2-43
. The green LED flashes