Removing the Memory Board
To remove a memory board:
1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter.
2. Open the Processor and Memory Module. See "Opening and Removing the Processor and
Memory Module" earlier in this chapter.
3. Rotate the memory board ejectors outward
the processor board
4. Place the memory expansion board, components facing up, on a flat surface.
Figure 2-22. Removing the memory board
IMPORTANT: The memory board is part of the system interconnect scheme and must be seated
properly for server startup.
Reverse steps 1 through 4 to replace the memory board.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system
components to cool before touching them.
.
1
Removal and Replacement Procedures 2-27
, and then remove the memory board from
1
2