Assembly - Yamaha RS90GTZ Service Manual

SLIDE RAIL SUSPENSION

ASSEMBLY

1. Install:
• Tension adjusters
(RST90GTZ)
TIP
Install the tension adjusters so that they are
angled outward as shown in the illustration.
2. Apply:
• ESSO beacon 325 grease or Aeroshell
grease #7A (RST90GTZ)
TIP
Apply grease to the bushings
in the area
5 ~ 15 mm (0.20 ~ 0.59 in)
3. Install:
• Control rod
TIP
Install the control rods with the water drain
holes facing downward.
4. Install:
• Rear shock absorber
TIP
Install the rear shock absorber with its gas cyl-
inder facing downward.
5. Install:
• Front shock absorber
TIP
Install the front shock absorber with the charg-
ing valve
snowmobile.
4-78
POWR
TR
and the shaft
shown in the illustration.
(RST90GTZ)
(RST90GTZ)
(RST90GTZ)
facing towards the rear of the