Yamaha RS90GTZ Service Manual page 124

STEERING (RST90GTZ)
3 Nm (0.3 m•kgf, 2.2 ft•lbf)
10 Nm (1.0 m•kgf, 7.2 ft•lbf)
23 Nm (2.3 m•kgf, 17 ft•lbf)
Order Job name/Part name
Handlebar removal
1 Handlebar cover
2 Rubber cover
3 Plastic band
4 Thumb warmer lead coupler
5 Engine stop switch lead coupler
6 Throttle switch lead coupler
7 Grip warmer lead connector
8 Brake light switch lead coupler
9 Headlight beam switch lead coupler
10 Grip/thumb warmer adjustment switch
lead coupler
11 Helmet shield heater jack lead coupler
12 Right handlebar switch cover
STEERING
Q'ty
Remove the parts in the order listed below.
1
1
2
TIP
To install the rubber cover, refer to
"CABLE ROUTING" in CHAPTER 9.
1 Disconnect.
1 Disconnect.
2 Disconnect.
4 Disconnect.
1 Disconnect.
1 Disconnect.
1 Disconnect.
1 Disconnect.
1
3-10
CHAS
Remarks