Yamaha RS90GTZ Service Manual page 67

TRACK TENSION ADJUSTMENT
d. Check the track alignment with the slide
runner
the left and right adjusters to adjust.
Track alignment
Slide runner
Track
Track clip
Gap
RS90GTZ/RS90LTGTZ
RST90GTZ
Forward
e. Adjust the track deflection until the speci-
fied amount is obtained.
Track deflection
NOTICE
The adjusters should be turned an equal
amount.
f. Recheck the alignment and deflection. If
necessary, repeat steps (c) to (e) until the
specified amount is obtained.
g. Apply ESSO beacon 325 grease or Aero-
shell grease #7A to the rear axle nut.
(RS90GTZ/RS90LTGTZ)
h. Tighten the rear axle nut.
2-44
. If the alignment is incorrect, turn
Shifted to
right
Left adjuster Turn out
Right adjuster Turn in
More than
specified
Left adjuster Turn in
Right adjuster Turn in
Rear axle nut:
75 Nm (7.5 m•kgf, 54 ft•lbf)
INSP
ADJ
Shifted to
left
Turn in
Turn out
Less than
specified
Turn out
Turn out