LIGHTING SYSTEM
BULB(S)
TIP
Do not check any of the lights that use LEDs.
1. Remove:
• Headlight bulb
2. Connect:
• Analog pocket tester (pocket tester)
(to the bulb terminals)
WARNING
Keep flammable products and your hands
away from the bulb while it is on; it will be
hot. Do not touch the bulb until it cools
down.
3. Inspect:
• Bulb(s)
Terminal
–
–
HEADLIGHT BEAM SWITCH
1. Disconnect:
• Headlight beam switch coupler
RS90GTZ/RS90LTGTZ
RST90GTZ
2. Connect:
• Analog pocket tester (pocket tester)
(to the headlight beam switch coupler)
8-35
ELEC
Continuity
Yes
Yes