Yamaha RS90GTZ Service Manual page 493

SPEC
CABLE ROUTING
Seat bracket assembly
Insert the projection of the pas-
senger grip warmer coupler into
the hole in the seat bracket
assembly.
Route the passenger grip
warmer lead through the upper
portion of the hole in the back-
rest side cover.
Backrest side cover
Fasten the tail sub-wire harness
at the positioning tape to the
pipe of the storage compart-
ment bracket with the plastic
band. Install the plastic band
with the buckle positioned to
inside of the tail sub-wire har-
ness and the end pointing
inward. Make sure that the band
does not contact the bracket.
Tail sub-wire harness
Fasten the tail sub-wire harness
with the plastic band. Install the
plastic band with the buckle
positioned to inside of the tail
sub-wire harness and the end
pointing inward.
9-60