Brake Lever Adjustment; Lubrication - Yamaha RS90GTZ Service Manual

BRAKE LEVER ADJUSTMENT/LUBRICATION

BRAKE LEVER ADJUSTMENT

1. Adjust:
• Brake lever position
Adjustment steps:
• While pushing the brake lever forward, loosen
the locknut .
• While pushing the brake lever forward, turn
the adjusting bolt
the brake lever is in the desired position.
• Tighten the locknut.
Brake lever adjusting locknut:
6 Nm (0.6 m•kgf, 4.3 ft•lbf)
NOTICE
Be sure to tighten the locknut, as failing to
do so will cause poor brake performance.

LUBRICATION

Brake lever, throttle lever and throttle cable
end
1. Lubricate the brake lever pivot, throttle lever
and the ends of the throttle cables.
Recommended lubricant:
Throttle lever and throttle cable
end:
ESSO Beacon 325 grease or
Aeroshell grease #7A
Brake lever pivot:
Silicon grease
WARNING
Apply a dab of grease onto only the end of
the cables.
Do not grease the throttle cables.
They could freeze and cause a loss of con-
trol.
2-49
INSP
ADJ
in direction or until