Yamaha RS90GTZ Service Manual page 241

ENGINE ASSEMBLY
• Tighten the rear engine mounting bolt spacer
to specification with an engine mount spacer
wrench (engine adjuster)
Rear engine mounting bolt
spacer:
9 Nm (0.9 m•kgf, 6.5 ft•lbf)
Engine mount spacer wrench: Engine mount spacer wrench:
YS-01516 YS-01516
Engine adjuster: Engine adjuster:
90890-01516 90890-01516
• Tighten the rear engine mounting nut.
Rear engine mounting nut:
65 Nm (6.5 m•kgf, 47 ft•lbf)
• Tighten the front engine mounting bolt spac-
ers (right and left) until they come to con-
tact with the engine damper
TIP
Do not apply torque to the front engine mount-
ing bolt spacers.
• Install the washers and nuts and then, tighten
the front engine mounting nuts (right and
left).
Front engine mounting nut:
65 Nm (6.5 m•kgf, 47 ft•lbf)
5-16
ENG
.
.