Show Asymmetric_Vlan; Enable Pvid Auto_Assign; Disalbe Pvid Auto_Assign - D-Link DGS-1210/ME Series Reference Manual

Command: disable asymmetric_vlan
Success.
DGS-1210-28MP/ME:5#

show asymmetric_vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display Asymmetric VLAN status:
DGS-1210-28MP/ME:5# show asymmetric_vlan
Command: show asymmetric_vlan
Asymmetric VLAN : Enable
DGS-1210-28MP/ME:5#

enable pvid auto_assign

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the auto-assign PVID:
DGS-1210-28MP/ME:5# enable pvid auto_assign
Command: enable pvid auto_assign
Success.
DGS-1210-28MP/ME:5#

disalbe pvid auto_assign

Purpose
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To display the Asymmetric VLAN status on the Switch.
show asymmetric_vlan
The show asymmetric_vlan command displays the Asymmetric
VLAN status on the Switch.
None.
None.
To enable auto assignment of PVID.
enable pvid auto_assign
The enable pvid auto_assign command enables the auto-assign of
PVID. When this is enabled, PVID will be possibly changed by PVID
or VLAN configuration. When user configures a port to VLAN X's
untagged membership, this port's PVID will be updated with VLAN
X. In the form of VLAN list command, PVID is updated with last item
of VLAN list. When user removes a port from the untagged
membership of the PVID's VLAN, the port's PVID will be assigned
with "default VLAN". The default setting is enabled.
None.
Only Administrator, Operator and Power-User-level users can issue
this command.
To disable auto assignment of PVID.
273