1-Bin Tray Unit Installation - Ricoh B022 Service Manual

3.7 1-BIN TRAY UNIT INSTALLATION

3.7.1 COMPONENT CHECK
Check the quantity and condition of the components against the following list.
No.
1 1-Bin Tray Unit
2 Tray
3 Sub-Tray
4 Tray Guide
5 Paper Guide
6 Tapping Screw M3x8
5
4
3.7.2 INSTALLATION PROCEDURE

CAUTION
Unplug the copier power cord before starting the following procedure.
NOTE: Before installing this 1-bin tray unit, the optional interchange unit (B416)
must be installed.
1. Remove all tapes.
2. If the optional bridge unit has been installed, open the right jam removal cover
[A] of the bridge unit.
If the optional bridge unit is not installed, skip this step.
SM
Description
6
2
[A]
3-23
1-BIN TRAY UNIT INSTALLATION
Q'ty
1
1
1
1
1
1
1
3
B413I101.WMF
B413I501.WMF
B022/B027