User Parameters - YASKAWA E7U Programming Manual

Parameter List
Parameter
Parameter Name
No.
Digital Operator Display
A1-00 Language Selection
Select Language
A1-01 Access Level Selection
Access Level
Initialize Parameters
A1-03
Init Parameters
Password 1
A1-04
Enter Password
Password 2
A1-05
Select Password
User Parameter 1
A2-01
User Param 1
User Parameter 2
A2-02
User Param 2
User Parameter 3
A2-03
User Param 3
User Parameter 4
A2-04
User Param 4
User Parameter 5
A2-05
User Param 5
User Parameter 6
A2-06
User Param 6
Denotes that parameter can be changed when the Drive is running.
Table A.1 Parameter List
Description
Initialization
Language selection for digital operator display.
0: English
2: Deutsch
3: Francais
4: Italiano
5: Espanol
6: Portugues
*Not returned to factory setting by initialization
This setting determines which parameters are accessible.
0: Operation Only
1: User Level
2: Advanced Level
Used to return all parameters to their factory or user setting.
0: No Initialize
1110: User Initialize (The user must set their own parameter
default values and then parameter o2-03 must be set to "1" to save
them. If the parameter values are changed after o2-03 is set to "1",
the user default values can be restored by setting A1-03 to 1110.)
2220: 2-Wire Initial
3330: 3-Wire Initial
When the value set into A1-04 does NOT match the value set into
A1-05, parameters A1-01 thru A1-03 and A2-01 thru A2-32 cannot
be changed. All other parameters as determined by A1-01 can be
changed. Parameter A1-05 can be accessed by pressing the MENU
key while holding the RESET key.

User Parameters

Selects the parameters to be available in the User Access Level
(A1-01 = 1). These are the only parameters accessible for the user
level. These parameters are not related to the User Initialize
function.
Parameters A - 2
Setting Factory Menu
Range Setting Location
0 to 6 0 Programming
0 to 2 2 Programming
0 to
0 Programming
3330
0 to 9999 0 Programming
0 to 9999 0 Programming
–
Programming
–
Programming
–
Programming
b1-01
to
o3-02
–
Programming
–
Programming
–
Programming