Replace the paper tray.
17.
Fax modem removal
Warning: This part might contain customer confidential information. See
for more details. After removing this part, return it to your next level of support so any data can be
removed. If the customer requests to keep the part, they must sign a confirmation of memory device
retention form.
Remove the rear frame cover. See
1.
Open the left door cover.
2.
Loosen the two screws (A) securing the fax modem, and then lift the card to remove it.
3.
Disconnect the cable (B) from the connector on the system board. The connector is under the card.
4.
A
Lift, and remove the fax modem.
5.
"Rear frame cover removal" on page
B
"Data Security Notice" on page 4-1
4-37.
Repair information
7526
Previous
Next
Go Back
4-91