201.08, 201.31-Paper Jam Error Service Check - Lexmark X746de Service Manual

201.06, 201.08, 201.31—Paper Jam error service check
Step Questions / actions
Open the front access door. Turn the
1
transport belt gear clockwise.
Did the transport belt move?
1. Enter Diagnostics mode (press and hold
2
buttons 3 and 6, turn on the MFP, and
release the buttons when the progress bar
displays.
2. Perform the Align Motor Test. See
tests" on page
Can you hear the align motor run?
Turn the printer off, and then remove the
3
fuser. See
"Fuser assembly removal" on
page 4-104.
Is the exit sensor flag damaged?
Verify the paper is loaded properly in the
4
paper tray or manual feed slot.
Is the paper properly loaded?
1. Replace the fuser. See
5
removal" on page
Note: Do not reset the fuser count until
the problem is resolved.
2. Turn the printer off.
3. POR the printer.
Did the error clear?
"Motor
3-8.
"Fuser assembly
4-104.
Yes
Go to step 2.
Go to step 3.
Replace the fuser. See
"Fuser assembly
removal" on page 4-104.
Go to step 5.
Problem resolved.
7526
No
Replace the transport belt.
See
"Transfer module
removal" on page 4-180.
Replace the paper pick
mechanism. See
"Paper
pick mechanism
assembly removal" on
page 4-130.
Go to step 4.
Load paper correctly.
Replace the original fuser,
and go to step 6.
Diagnostic information
2-69
Previous
Next
Go Back