Contact Springs Kit Removal - Lexmark X746de Service Manual

Contact springs kit removal

See
"Contact springs kit" on page 7-11
Toner cartridge contacts removal
Remove the LVPS. See
1.
Remove the printhead. See
2.
3. Remove contact spring cables from the cable restraints (A).
Note: Pay attention to the routing of the cartridge contact cables, and the appropriate slots where each
cartridge contact is installed.
for the part number.
"Low-voltage power supply (LVPS) removal" on page
"Printhead removal, installation, and adjustment" on page
A
7526
4-115.
4-140.
Repair information
4-63
Previous
Next
Go Back