Xx, 163.Xx-Motor (Option Tray 3) Error Service Check - Lexmark X746de Service Manual

7526
162.xx, 163.xx—Motor (option tray 3) error service check
Step Questions / actions
1. Turn the printer off.
1
2. Reseat option tray 3.
3. Enter Diagnostics mode (press and hold
buttons 3 and 6, turn on the MFP, and
release the buttons when the progress bar
displays.
4. Touch PRINT TESTS.
5. Touch Tray 3.
6. Touch Single.
Did the page print?
1. Remove all input options connected to the
2
machine.
2. Connect tray 3 directly on the printer
making it tray 2.
3. Bring the printer up in Diagnostics Menu
(turn off the printer, press and hold
buttons 3 and 6, and turn on the printer).
4. Touch PRINT TESTS.
5. Touch Tray 2.
6. Touch Single.
Did the page print?
Check the top and bottom autoconnect
3
connectors of tray 2 (input option above tray
3) for damages.
Are the autoconnect connectors damaged?
Check the top and bottom autoconnect
4
connectors of tray 3 for damages.
Are the autoconnect connectors damaged?
1. Turn the printer off.
5
2. Remove the rear frame cover. See
frame cover removal" on page
3. Check the option cable in connector
JOPT1 on the system board for proper
connection, for cable pinch points, and for
any other damage to the cable or
connector.
4. Remove the right cover. See
cover removal" on page
5. Check the option cable for pinch points
and any damage.
6. Check the autoconnect connector for
damage.
Is the cable damaged?
Service Manual
2-64
Problem resolved.
Go to step 3.
Replace tray 2 550 input
option
• For 550 option, replace
tray 3 550 input option.
• For HCIT, replace the
HCIT top plate
assembly.
Replace the option cable.
See
"Option cable
"Rear
removal" on page
4-37.
"Right
4-38.
Yes
Go to step 2.
Go to step 4
Go to step 4.
Go to step 5.
• For 550 option, replace
tray 3 550 input option.
4-128. • For HCIT, replace the
HCIT top plate
assembly.
Previous
No
Next
Go Back