Lexmark X746de Service Manual page 506

7526
Lift the ADF upper case cover up to access the ground screw, and remove the ground screw (B).
3.
Note: If you are removing the ADF upper case cover to access another part, leave the cable attached, and you
are done. If you need to replace the ADF upper case cover, continue with the next step to remove the separate
cable.
Remove the screw (C) holding the ground cable on the ADF upper case cover. The cable is not part of the
4.
new FRU, and is reinstalled on the new FRU.
Service Manual
4-216
Previous
Next
Go Back