Scanner Mdc Card Removal - Lexmark X746de Service Manual

Turn the ADF over.
8.
9. Remove the ADF motor side cover. See
Remove the screw (F) and disconnect the scanner ICC cable ground cable (G).
10.
11. Remove the scanner ICC cable.

Scanner MDC card removal

Warning: This part might contain customer confidential information. See
for more details. After removing this part, return it to your next level of support so any data can be
removed. If the customer requests to keep the part, they must sign a confirmation of memory device
retention form.
Warning: When replacing any one of the following components:
•
Scanner MDC card
•
System board
Only replace one component at a time. Replace the required component, and perform a POR before
replacing a second component listed above. If this procedure is not followed, the printer will be
rendered inoperable.
Remove the rear cover. See
1.
Remove the left cover. See
2.
"ADF motor side cover removal" on page
"Rear cover removal" on page
"Left cover removal" on page
4-212.
"Data Security Notice" on page 4-1
4-36.
4-24.
Repair information
7526
Previous
Next
Go Back
4-261