7526
Remove the card.
9.
Scanner ICC cable removal
Remove the ADF. See
1.
Turn the ADF over. Be sure to brace the ADF to prevent damage.
2.
Remove the three screws (A) securing the MDC cable cover, and remove the cover.
3.
Disconnect the ICC cable (B) from the scanner ICC card.
4.
Remove the screw (C) securing the cable tie-down, and remove the cable from the tie-down.
5.
Remove the cable from the cable restraints (D), and note the routing.
6.
Open the clips (E) on the toroid, and set it aside for reinstallation later.
7.
Service Manual
4-260
"ADF removal (entire)"
Previous
Next
Go Back