Modem Removal - Lexmark MX310 Service Manual

Note: Pay attention to the original position of the spring and the actuators.
Installation notes:
a
Test for proper installation of the spring and the actuators.
b
Press the cartridge actuator. The cartridge lock should move up.
c
Release the cartridge actuator. The cartridge lock should move back to its original position.

Modem removal

1
Remove the right cover. See
2
Remove the controller board shield. See
3
Remove the toroid from the modem cable.
C
"Right cover removal" on page
"Controller board shield removal" on page
Parts removal
305
294.
7015
301.