Remove all of the toner cartridges.
8.
a.
Remove the four screws (D).
b.
Lift the rear cover and remove it.
Remove the rear frame cover.
9.
Loosen the eight screws (E).
a.
Lift the rear frame cover, and remove.
b.
Remove the right cover. See
10.
Remove the left cover with the left door cover attached. See
11.
Remove the system board support shield. See
12.
"Right cover removal" on page
"System board support shield removal" on page
4-38.
"Left cover removal" on page
Repair information
7526
Previous
Next
Go Back
4-24.
4-163.
4-141