Motor Calibration; Paper Prompts; Envelope Prompts - Lexmark X746de Service Manual

7526

Motor Calibration

This setting synchronizes the aligner and fuser motor speeds with the transfer belt speed to ensure that the
output is printed correctly.
Note: This test should be run at 600 dpi resolution and with duplex disabled.
To run the Motor Calibration:
Touch Motor Calibration from the Configuration Menu.
1.
Touch Motor Calibration.
2.
Calibrating... displays, and then the multiple function printer feeds eight blank pages.
Touch Back to return to the Configuration menu.

Paper Prompts

Controls the source the printer selects for a change paper source message. The printer displays the change
paper source message based on the size of the paper requested and not by the paper type.
Selections include Auto, Multi-Purpose Feeder, and Manual Paper. The multipurpose feeder is available on
some printer models.
Note: If the Configure MP setting is changed to Manual, a power-on reset is performed, and then the value of
the Paper Prompts menu item before the power-on reset was MP Feeder, then when the printer restarts, the
printer automatically changes the Paper Prompts setting to Manual Paper.
Load Manual overrides that would result in a change paper message are disabled for Paper or Env prompts that
are set to Manual, Manual Paper, or Manual Env.
To change the settings for Paper Prompts:
Touch Paper Prompts from the Configuration Menu.
1.
Touch the
2.
Touch Submit.
3.
Submitting changes... is displayed.
You are automatically returned to the Configuration menu.

Envelope Prompts

Controls the source the printer selects for a change envelope source message. The printer displays the change
envelope message based on the size of the envelope requested and not by the envelope type.
Selections include Auto, MP Feeder, and Manual Envelope. MP Feeder is only available on some printer
models.
Note: If the Configure MP setting is changed to Manual, and a power-on reset is performed, and the value of
the Envelope Prompts menu item before the power-on reset was MP Feeder, then when the printer restarts, the
printer automatically changes the Envelope Prompt setting to Manual Envelope.
Load Manual overrides that would result in a change paper message are disabled for Paper or Envelope
prompts that are set to Manual, Manual Paper, or Manual Envelope.
Service Manual
3-40
or arrow to toggle between Auto, Multi-Purpose Feeder, and Manual Paper.
Previous
Next
Go Back