Lexmark X746de Service Manual page 305

Registration (black)
Top Margin
Reconnect the power cord to the electrical outlet, but do not turn on the printer yet.
1.
Enter Diagnostic mode (press and hold 3 and 6, turn on the printer, and release the buttons when the
2.
progress bar appears).
Touch REGISTRATION.
3.
Touch Quick Test.
4.
Beside Top Margin, use the arrows to change the values.
5.
a. Adjust the values until both top alignment marks are on the top edge of the print.
The right arrow increases the value and moves the top alignment marks down the page.
•
The left arrow decreases the value and moves the top alignment marks up the page.
•
Touch Submit to save the value, and then touch Registration to return to the Registration menu.
b.
Print the Quick Test page, and check the top alignment marks. Repeat adjustment of the top margin and
6.
printing of the Quick Test page until top margin is set.
Bottom Margin
Adjust the bottom margin until the points of the bottom margin alignment marks are visible and touching
1.
the edge of the paper.
The right arrow increases the value and moves the bottom alignment marks up the page.
•
The left arrow decreases the value and moves the bottom alignment marks down the page.
•
2. Touch Submit to save the value.
Print the Quick Test page, and repeat this process until the bottom margin is adjusted.
3.
7526
Repair information
4-15
Previous
Next
Go Back