Base Latch - Toshiba TECRA M9 Maintenance Manual

Hide thumbs Also See for TECRA M9:

Table of Contents

4.19 Base latch

Removing the base latch

The following describes the procedure for removing the base latch. (See Figure 4-31.)

1. Remove the base caps on the bottom while releasing latches.

2. Remove the base latches. Be careful not lose the springs.

Installing the base latch

The following describes the procedure for installing the base latch (See Figure 4-31).

1. Install the springs to the base latches.

2. Install the base latches to the slot of the base assembly.

3. Install the base caps while engaging the latches.

TECRA M9 Maintenance Manual (960-631)

Figure 4-31 Removing the base latch

4 Replacement Procedures

[CONFIDENTIAL]

Table of Contents