Toshiba TECRA M9 Maintenance Manual page 292

4 Replacement Procedures 4.23 LCD unit/FL inverter
8. Remove two glass tapes securing the LCD cable and disconnect the LCD cable from
the connector on the LCD unit.
Glass tape
LCD cable
Figure 4-43 Removing the LCD cable
9. Remove the following screws and LCD unit.
• M2×3C ×4
S-THIN HEAD screw
M2×3C S-THIN HEAD
LDC unit
M2×3C S-THIN HEAD
Figure 4-44 Removing the LCD unit
4-58 [CONFIDENTIAL] TECRA M9 Maintenance Manual (960-631)