4 Replacement Procedures
4.26 Hinge
Removing the Hinge
The following describes the procedure for removing the hinge. (Figure 4-47 and 4-48.)
1. Push the LCD mask down.
CAUTION: Do not push the top of the LCD mask. It may break the LCD mask.
2. Remove the following screws.
• M2.5×4B
3. Stand the hinges up with the LCD mask and remove the LCD mask.
M2.5×4B FLAT HEAD
4-62
[CONFIDENTIAL]
FLAT HEAD screw
Figure 4-47 Removing the hinge (1)
×4
M2.5×4B FLAT HEAD
LCD mask
TECRA M9 Maintenance Manual (960-631)
4.26 Hinge