Toshiba TECRA M9 Maintenance Manual page 226

3 Tests and Diagnostics
12. PCI Bus
This item displays the interrupt level for the Card Bus. It is for information only and
cannot be changed.
PCI BUS = IRQ10, IRQ11
13. Display
This group of options configures the computer's display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected
LCD+AnalogRGB
NOTE: Pressing Fn+F5 changes the display setting in the order of internal LCD to
simultaneous to external monitor.
14. Peripheral
Use this option to select the parallel port mode and hard disk mode.
(a) Internal Pointing Device
This option enables and disables the Dual Point.
Enabled
Disabled
3-102 [CONFIDENTIAL]
Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)
Selects both the internal LCD and the external monitor
for simultaneous display.
Enables the Dual Point. (Default)
Disables the Dual Point.
TECRA M9 Maintenance Manual (960-631)
3.30 SETUP