4 Replacement Procedures
Installing the Hinge
The following describes the procedure for installing the hinge. (Figure 4-47 and 4-48.)
1. Pass the right hinge through the hole and secure it with the following screw.
• M2.5×6C
2. Pass the left hinge through the hole.
3. Secure the left hinge and metal plate with the following screws.
• M2.5×6C
• M2×4B
4. Set the LCD mask to the hinges and secure it with the following screws.
• M2.5×4B
4-64
[CONFIDENTIAL]
Tapping screw
Tapping screw
S-THIN HEAD screw
FLAT HEAD screw
×1
×1
×1
×4
TECRA M9 Maintenance Manual (960-631)
4.26 Hinge