Toshiba TECRA M9 Maintenance Manual page 274

Hide thumbs Also See for TECRA M9:

Table of Contents

4 Replacement Procedures

3. Remove the fingerprint sensor board fixed with the double-sided tape and peel off

the double-sided tape that prevents a waterdrop from entering the computer.

4. Disconnect the fingerprint sensor cable from the connector on the fingerprint sensor

Fingerprint sensor cable

Double-sided tape

Figure 4-27 Removing the fingerprint sensor board

[CONFIDENTIAL]

4.15 Fingerprint sensor board

Fingerprint sensor board

TECRA M9 Maintenance Manual (960-631)

Chapters

Table of Contents