4.7 Keyboard holder
4.7
Keyboard holder
Removing the Keyboard holder
The following describes the procedure for removing the keyboard holder. (See Figure 4-11.)
1. Open the display and make it flat.
2. Insert your fingers into the slots on both sides and remove the keyboard holder.
Slot
Installing the Keyboard holder
The following describes the procedure for installing the keyboard holder. (See Figure 4-11.)
1. Install the keyboard holder while engaging the latches.
TECRA M9 Maintenance Manual (960-631)
Keyboard holder
Figure 4-11 Removing the keyboard holder
4 Replacement Procedures
Slot
[CONFIDENTIAL]
4-21