Toshiba TECRA M9 Maintenance Manual page 222

Hide thumbs Also See for TECRA M9:

Table of Contents

3 Tests and Diagnostics

8. Configuration

This option displays the configuration method.

(a) Device Config.

The devices are initialized when the PNP OS loads.

If you are using an OS that does not have PNP capacity, select "All Devices."

The Display shows the following message:

Device Config. = All Devices

This option is used to select Full Power, Low Power or User Setting of the battery

[CONFIDENTIAL]

Initializes devices, which is needed to load an operating

system. Operating system initializes other devices.

All devices will be initialized.

The following shows full power settings.

The following shows low power settings.

TECRA M9 Maintenance Manual (960-631)

Chapters

Table of Contents