Toshiba TECRA M9 Maintenance Manual page 213

3.30 SETUP
Moving Within the SETUP Menu and Changing Values
1. Press and
items in a column. Press Fn+↑ (PgUp) and Fn + ↓ (PgDn) to move between the
two pages.
2. Press either the Space bar or Back Space to change the value.
Accepting Changes and Exiting the SETUP Window
1. Press End to accept the changes you made.
If the changed item does not require the system to reboot, the following message is
displayed:
Are you sure? (Y/N)
If the changed item requires the system to reboot, the following message is displayed:
Are you sure? (Y/N)
The changes you made will cause the system to reboot.
2. To make other changes, press N. Repeat the steps above.
3. To accept the changes, press Y.
TECRA M9 Maintenance Manual (960-631)
to move between the two columns. Press ↑ and ↓ to move between
3 Tests and Diagnostics
[CONFIDENTIAL] 3-89