Toshiba TECRA M9 Maintenance Manual page 253

4.6 Slim select bay module
3. Remove the following screws, connector cover and connector from the optical drive
assembly.
• M2×6C
4. Remove the following screw and connector base from the optical drive assembly.
• M2×2.8C
5. Remove the following screws and ODD side assembly from the optical drive
assembly
• M2×6C
• M2×22C
M2×22C BIND
M2×6C BIND
ODD side assembly
Figure 4-10 Detaching the optical disk drive assembly
TECRA M9 Maintenance Manual (960-631)
BIND screw
S-THIN HEAD screw
BIND screw
BIND screw
M2×2.8C S-THIN HEAD
Connector cover
4 Replacement Procedures
×2
×1
×1
×1
Connector base
Connector
M2×6C BIND
M2×6C BIND
[CONFIDENTIAL] 4-19