Toshiba TECRA M9 Maintenance Manual page 297

4.26 Hinge
4. Turn over the cover assembly and remove the following screws and metal plate.
• M2.5×6C
• M2×4B
5. Slide the left hinge inside and remove it through the hole.
6. Remove the following screw and right hinge.
• M2.5×6C
7. Slide the right hinge inside and remove it through the hole.
M2×4B S-THIN HEAD
Metal plate
TECRA M9 Maintenance Manual (960-631)
Tapping screw
S-THIN HEAD screw
Tapping screw
M2.5×6C Tapping
Figure 4-48 Removing the hinge (2)
4 Replacement Procedures
×1
×1
×1
M2.5×6C Tapping
Hinge (left)
[CONFIDENTIAL]
Hinge (right)
4-63