Memory Module B - Toshiba TECRA M9 Maintenance Manual

4 Replacement Procedures
4.4

Memory module B

CAUTION: The power must be turned off when you remove the memory module.
Removing the memory module with the power on risks damaging the module
or the computer itself.
Do not touch the memory module terminals. Any dirt on the terminals may
cause memory access problems.
Never press hard or bend the memory module.
Removing the memory module B
To remove the memory module B, make sure the computer is in boot mode and powered off.
Then perform the following procedure. (See Figure 4-4 and 4-5.)
1. Loosen the screw and remove the memory slot cover.
4-12 [CONFIDENTIAL]
Screw
Figure 4-4 Removing the memory slot cover
4.4 Memory module B
Memory slot cover
TECRA M9 Maintenance Manual (960-631)