Toshiba TECRA M9 Maintenance Manual page 268

4 Replacement Procedures
2. Disconnect the touch pad cable from the connector CN3240 on the system board and
remove the touch pad from the slot. (The touch pad is adhered by the double-sided
tape to the slot.)
Touch pad cable
3. Peel off the glass tape and disconnect the touch pad cable from the connector on the
touch pad.
Touch pad cable
Insulator
Double sided tape
4-34 [CONFIDENTIAL]
CN3240
Figure 4-22 Removing the touch pad
Glass tape
Double sided tape
Figure 4-23 Removing the touch pad cable
Touch pad
TECRA M9 Maintenance Manual (960-631)
4.13 Touch pad