4.9 Bluetooth module
4.9
Bluetooth module
Removing the Bluetooth module
The following describes the procedure for removing the Bluetooth module. (See Figure 4-
13.)
1. Disconnect the Bluetooth cable and Bluetooth antenna cable from the connector on
the Bluetooth module.
2. Push the latch and remove the Bluetooth module from the slot.
Bluetooth module
Bluetooth antenna cable
Latch
Installing the Bluetooth module
The following describes the procedure for installing the Bluetooth module. (See Figure 4-13.)
1. Install the Bluetooth module into the slot while engaging the latch.
2. Connect the Bluetooth cable and Bluetooth antenna cable to the connector on the
Bluetooth module.
TECRA M9 Maintenance Manual (960-631)
Figure4-13 Removing the Bluetooth module
4 Replacement Procedures
Bluetooth cable
[CONFIDENTIAL]
4-23