Scanner Reference Led Cable Assembly Removal - Lexmark MB790MFP Service Manual

Scanner reference LED cable assembly removal

1. Remove the scanner platen glass cover assembly. See
(model MB780)" on page 4-140
removal (model MB790)" on page
2. Remove the screw (A) securing the scanner reference LED cable assembly to the flatbed frame.
3. Remove the scanner reference LED cable assembly.
4. Remove the wire harness from the scanner reference LED cable assembly.
"Scanner platen glass cover assembly removal
or "Scanner platen glass cover assembly
4-139.
A
7462
4-93
Repair information
Previous
Next
Go Back