Table of Contents
Advertisement
8. Remove the four screws (F) securing the carriage drive motor assembly with cable to the flatbed frame.
9. Remove the carriage drive motor assembly with cable.
Carriage belt removal
1. Remove the scanner platen glass cover assembly. See
(model MB780)" on page 4-140
removal (model MB790)" on page
2. Loosen the screw (A) on the carriage belt tensioner.
3. Pull slack in the carriage belt, and retighten screw (A).
4. Remove the clip (B) and retaining washer (C) from carriage drive motor assembly with cable.
5. Remove the carriage belt from the carriage belt tension assembly and the drive motor assembly.
or
"Scanner platen glass cover assembly
4-139.
A
F
F
"Scanner platen glass cover assembly removal
Repair information
7462
Previous
Next
Go Back
4-145
Advertisement
Table of Contents
