Door Assembly, Rear Removal - Lexmark MB790MFP Service Manual

7462
6. Remove the three screws (A) securing the side cover, left to the machine.
7. Remove the side cover, left by pulling out the tabs on the top and bottom and by pulling the cover out of its
rear hinges.

Door assembly, rear removal

1. Open the door assembly, rear.
2. Twist the door strap left or right until vertical, and pull the strap out of the slot.
3. Position the door assembly, rear at a 45° angle as shown in the picture.
4-124
Service Manual
A
Previous
Next
Go Back