7462
6. Remove the two screws (C) securing the USB cable (D) to the upper panel.
Previous
7. Disconnect the USB Cable.
Next
Go Back
C
D
Operator panel door assembly removal (MB780)
1. Remove the laser cover. See
"Laser cover removal (model MB780)" on
page
4-106.
2. Remove the counter balance springs (A) on both sides.
3. Remove the print cartridge cover springs (B) on both sides.
4. Remove the E-clips (C) on both sides securing the links to the hinges, and remove the links.
4-115
Repair information