7462
Printhead assembly removal
WARNING: When replacing the printhead assembly, ensure that the printhead skew is properly adjusted, or
print quality issues will occur. See
1. Remove the laser cover. See
page 4-106
2. Remove the six screws (A) securing the metal cover to the machine.
A
3. Remove the metal cover.
4. Disconnect the connections (B) from the printhead assembly.
4-34
Service Manual
"Polygon printhead mechanical registration adjustment" on page
"Laser cover removal (models MB780)" on
or
"Laser cover removal (model MB790)" on page
A
4-104.
B
Previous
4-2.
Next
Go Back