Mpf Media Out Actuator Removal - Lexmark MB790MFP Service Manual

1. Remove the media turn guide. See
2. Remove the four screws (A) securing the MPF lift plate assembly to the machine.
3. Gently detach the MPF lift plate assembly.
4. Disconnect the connector (B) from the MPF lower deflector assembly.
5. Remove the MPF lift plate assembly.
Replacement Warning: When replacing the MPF lift plate assembly, ensure that the lever (C) is held down
when reinstalling the MPF lift plate assembly, or damage will occur.
Replacement Warning: When replacing the MPF lift plate assembly, ensure that the MPF pick solenoid
assembly does not become damaged.

MPF media out actuator removal

1. Remove the media turn guide. See
2. Gently unsnap the MPF media out actuator from the machine.
3. Remove the media out actuator.
"Media turn guide removal" on page
B
A
"Media turn guide removal" on page
C
7462
4-12.
4-12.
4-25
Repair information
Previous
Next
Go Back