Table of Contents
Advertisement
7462
Alignment assembly removal
Previous
WARNING: When replacing the alignment assembly, ensure that the media skew is properly adjusted using
the adjuster screw (C), or jamming will occur. See
"Alignment assembly adjustment" on page
4-3.
1. Remove the side cover, left. See
"Side cover, left removal (models MB780)" on
Next
page 4-123
or
"Side cover, left removal (model MB790)" on page
4-123.
2. Remove the six screws (A) securing the metal cover to the machine.
Go Back
A
3. Remove the metal cover.
4. Remove the inner deflector. See
"Inner deflector removal" on page
4-17.
5. Remove the MPF pick solenoid assembly. See
"MPF pick solenoid assembly removal" on page
4-26.
4-21
Repair information
Advertisement
Table of Contents
