Media Turn Guide Removal - Lexmark MB790MFP Service Manual

7462

Media turn guide removal

1. Remove the MPF tray door assembly. See
page 4-109
page 4-97.
2. Gently bend the left side of the media turn guide to release the hook (A) as shown in the picture.
3. While gently bending the media turn guide, move the media turn guide in the direction of the arrow.
4. Remove the media turn guide.
Replacement Warning: When replacing the media turn guide, ensure that it is properly installed, or jamming
will occur.
Fuser access door assembly removal
1. Remove the door assembly, rear. See
4-12
Service Manual
or "MPF tray door assembly removal (MB780 & MB790)" on
A
"Door assembly, rear removal" on page
"Operator panel assembly removal (MB790)" on
4-36.
Previous
Next
Go Back