Offset Stacker Sensor (Tamper Hp Left And Right) Removal - Lexmark MB790MFP Service Manual

Offset stacker sensor (tamper HP left and right) removal

1. Remove the offset stacker top cover. See
2. Disconnect the harness to the offset stacker sensor (tamper HP left and right).
3. Using your fingers, pinch the tabs securing the staple finisher sensor (tamper HP left and right) and remove.
Offset stacker sensor (bin full send) removal
1. Remove the stapler/stacker controller card assembly. See
removal" on page
"Offset stacker top cover removal" on page
A
4-246.
"Stapler/stacker controller card assembly
Repair information
7462
Previous
4-238.
Next
Go Back
4-249